Do you want your artificial grass to look so natural that it resembles real grass?
To achieve this, it is essential to join the turf sections properly so that the seams go unnoticed. We explain the process in detail in this article.
How to hide artificial grass seams on any type of surface.
Step 1: Measure and Prepare the Surface.
The first crucial step is to accurately measure the area where the artificial grass will be installed. Ensure you have precise dimensions to calculate the amount of grass needed, adding an extra 10% to account for potential waste during cutting. Then, prepare the surface by removing any debris and leveling and compacting the soil or base.
Step 2: Roll out the artificial grass.
Once the surface is prepared, it is time to lay out the artificial grass. Position the pieces with the fibers facing the same direction to achieve a more uniform appearance. Remember to leave excess grass at the edges for later trimming and adjustment.
Step 3: Measure and Cut the Artificial Grass.
Flip the artificial grass over and cut the pieces from the back (backing) to ensure clean cuts. Make sure to trim the edges and fit the pieces to the installation perimeter.
“Trimming” the artificial grass sections refers to a preparatory step taken before final installation, involving cutting the edges to remove any imperfections or irregularities. The primary goal of this process is to ensure that the seams between the pieces of artificial grass are as discreet and nearly imperceptible as possible, thereby achieving a professional and natural-looking finish.
To correctly carry out step three, we recommend:
- Inspection: Before joining the turf sections, the turf is inspected to identify any knots, fraying, or irregular edges on the artificial grass.
- Cutting: Once imperfections are detected, a cut approximately 0.5 cm wide is made along the edges of the artificial grass sections. This is done to remove problem areas and achieve a clean, uniform edge.
- Adjustment: The length or shape of the panels can also be adjusted according to the installation, especially at the edges where the pieces will be joined.
- Joining: After preparing the turf sections, the artificial grass pieces are joined using seaming tapes and special adhesives to ensure a solid connection.
Trimming the edges of the artificial grass sections before joining them results in a more professional and aesthetically pleasing installation. This ensures that the seams are virtually invisible and that the artificial grass looks like a natural, well-maintained surface. Furthermore, proper edge preparation contributes to the long-term durability and safety of the artificial grass.
Why is it beneficial to clean and sanitize artificial grass sections?
Trimming the edges of the artificial grass sections before joining them is an important step in the installation process. It ensures a more attractive and durable finish, enhances the area’s safety, and facilitates the bonding process. This extra care gives the artificial grass the look of a natural, well-maintained lawn, adding aesthetic appeal and comfort to any space.
- Removal of imperfections: During installation and transport, artificial grass sections often develop minor imperfections or irregularities along their edges. Trimming approximately 0.5 cm from each side removes these flaws, ensuring that the seams fit tightly and remain virtually invisible, resulting in a more uniform and professional-looking lawn.
- Improved aesthetics: trimming the turf sections ensures a cleaner, neater finish for the artificial grass. Seams will be more subtle and barely noticeable, creating a more natural and attractive look for the installed area. A flawless lawn enhances the beauty of the space, whether in gardens, patios, terraces, or sports areas.
- Prevent potential tripping hazards: knots and imperfections along the edges of the artificial turf can create small bumps or uneven areas—however slight—that could cause tripping or loss of balance when walking or running on the grass. Properly trimming and finishing the strips helps avoid these issues and contributes to a safe environment.
- Greater durability: trimming the turf sections before permanently joining them ensures a solid, long-lasting connection. Cleanly cut edges fit together better, preventing fraying or separation over time. A properly installed, flawless lawn has a longer lifespan and requires less maintenance.
- Facilitates bonding: trimming knots and edge imperfections creates a more uniform surface for applying the adhesive needed to join the artificial grass edges. This simplifies the installation process and ensures a stronger, more stable bond between the pieces.
Important: To effectively hide the seams, place the joining tape underneath the two pieces of artificial grass that need to be joined. Leave a gap of approximately 0.5 cm between the pieces so that the spacing is consistent and the seams are concealed.
At Best Garden, we are professionals in artificial grass installation.
Here you can see some of our projects.
